Resin model
Acid value mgKOH/g
ViscositymPa.s/200℃
Tg℃
Curing conditions
Friction type
Gas resistant furnace
Factory
Characteristic description
SDS
TDS
SJ4A
32-37
6000-9000
≥66
200℃/10min
Wuhu
93/7, High Tg, good exterior durability and excellent storage stability
SJ4C
30-36
4000-6000
≥61
200℃/10min
*
Wuhu
93/7, good flow and exterior durability, suited to tribo application
SJ4E
30-36
6000-8000
≥65
200℃/10min
Wuhu
93/7, excellent overall properties, widely applied to aluminum profile
SJ4E-4
30-36
6000-8000
≥65
200℃/10min
*
Wuhu
93/7, good gas-oven yellowing resistance, excellent overall properties, widely applied to aluminum profile
SJ4ET
29-34
4500-6500
≥62
200℃/10min
Wuhu
93/7, excellent flow, good mechanical properties and aging resistance
SJ4ET-4
29-34
4500-6500
≥62
200℃/10min
*
Wuhu
93/7, excellent flow, good gas-oven yellowing resistance, good mechanical properties and aging resistance
SJ4ETDT
29-34
4500-6500
≥62
200℃/10min
*
Wuhu
Tribo version of SJ4ET
SJ4G
17-23
6000-8500
≥57
200℃/15min
Wuhu
96/4, low acid value, use with SJ4H for dry blend matt finish
SJ4H
48-55
5000-7000
≥65
200℃/10min
Wuhu
90/10, high acid value, use with SJ4G for dry blend matt finish
SJ4211
29-35
4500-6500
≥62
200℃/10min
Wuhu
93/7, good mechanical properties and exterior durability.
SJ4211-6
29-35
4500-6500
≥62
200℃/10min
Wuhu
Organotin free version of SJ4211
SJ4212
28-32
5000-7000
≥61
200℃/10min
Wuhu
94/6, good flexibility and mechanical properties
SJ4213
30-35
4000-6000
≥65
200℃/10min
Wuhu
93/7, good flow and mechanical properties, non-blooming type
SJ4214
30-36
3500-5500
≥64
200℃/10min
Wuhu
93/7, good flow，flexibility and weatherability, excellent mechanical properties
SJ4222
35-40
2500-4500
≥60
200℃/10min
Wuhu
93/7, excellent mechanical properties and exterior durability, suited to thin film
SJ4223
40-45
2000-4000
≥61
200℃/10min
Wuhu
92/8, good flow, excellent mechanical properties and exterior durability, suited to transfer print coating
SJ4224
39-45
2500-4500
≥64
200℃/10min
Wuhu
92/8, suited to transfer print coating, excellent overall properties
SJ4225
39-45
2500-4500
≥64
200℃/10min
Wuhu
92/8, high Tg, excellent exterior durability good boiling resistance, suited to transfer print coating
SJ4228
39-45
1500-3500
≥62
200℃/10min
Wuhu
92/8, good surface smooth, suited to transfer print coating
SJ4229
30-36
2000-4000
≥63
200℃/10min
Wuhu
93/7, suited to transfer print coating, excellent surface smooth
SJ4300
30-36
3000-6000
≥63
200℃/10min
Wuhu
93/7, good flow, good exterior durability
SJ4301
29-35
3000-6000
≥65
200℃/10min
Wuhu
93/7, good flow, normal exterior durability
SJ4302
26-30
4500-6500
≥66
200℃/10min
Wuhu
94/6, high Tg, good flow,excellent mechanical properties
SJ4401
28-32
5500-7500
≥63
200℃/10min
Wuhu
94/6, general-purpose resin, excellent mechanical properties
SJ4401-2
28-32
5500-7500
≥63
200℃/10min
Wuhu
94/6, general-purpose resin, good flow, good flexibility, excellent mechanical properties, low blooming
SJ4401-6
28-32
5500-7500
≥63
200℃/10min
Wuhu
Organotin free version of SJ4401
SJ4402DT
28-32
4000-7000
≥63
200℃/10min
*
Wuhu
94/6, good flow, suited to tribo application
SJ4522
29-34
4500-6500
≥62
200℃/10min
Wuhu
93/7, good flow, mechanical properties, aging and yellowing resistance
SJ4578
30-36
2500-5500
≥59
160℃/20min
Wuhu
93/7, low cure, good flow, excellent exterior durability
SJ4580
16-22
4000-7000
≥62
200℃/15min
Wuhu
96/4, low acid value, superdurable resin, use with SJ4581 for dry blend matte finish
SJ4581
48-55
3000-7000
≥65
200℃/15min
Wuhu
90/10, high acid value, superdurable resin, use with SJ4580 for dry blend matte finish
SJ4582
30-36
5500-8000
≥60
200℃/10min
Wuhu
93/7, excellent resistence to weather and handprint, suited to orange peel finish
SJ4583
30-36
6000-8000
≥64
200℃/10min
Wuhu
93/7, excellent weatherability and overall propertties, widely used in Al profiles
SJ4584
30-36
4000-6000
≥67
200℃/10min
Wuhu
93/7，good flow, excellent weatherability, widely used in Al profiles
SJ4588
30-36
5000-7000
≥63
200℃/10min
Wuhu
93/7, superdurable resin
SJ4588-2
33-38
2000-4000
≥62
200℃/10min
Wuhu
93/7, good flow, superdurable resin
SJ4700
33-38
3000-5000
≥60
160℃/15min
Wuhu
93/7, low temperature cure, good flow and mechanical properties
SJ4701
30-35
4000-7000
≥60
160℃/10min
150℃/15min
Wuhu
93/7, low temperature cure, good overall properties
SJ4702
30-36
4000-6000
≥67
180℃/10min
Wuhu
93/7, fast cure, good exterior durability, excellent overall properties
SJ4703
29-35
3000-6000
≥62
160℃/15min
Wuhu
93/7, low T curing and low blooming, suited to construction machinery
SJ4713
29-35
2800-4800
≥61
160℃/10-15min
Wuhu
93/7, low temperature cure, good exterior durability, non-blooming
SJ4800
23-28
4800-6800
≥60
200℃/20min
Wuhu
95/5, slow reaction speed, low qty. of TGIC, good overall properties
SJ4801
30-36
3500-5500
≥61
200℃/10min
Wuhu
93/7, good overall properties, no sagging
SJ4802
30-35
4000-6000
≥65
200℃/10min
Wuhu
93/7, good flexibility, mechanical properties and exterior durability
SJ4803
48-55
3000-5500
≥66
200℃/10min
Wuhu
90/10, use with SJ5811 for dry blend matte finish, very good surface aspect
SJ4804
48-55
3000-5500
≥64
200℃/10min
Wuhu
90/10, use with SJ5811 for dry blend matte finish, very good surface aspect
SJ4807
48-55
4000-6000
≥66
200℃/10min
Wuhu
90/10, high avid value, use with SJ4808 for dry blend matte finish at any ratio
SJ4808
17-23
6000-8000
≥63
200℃/10min
Wuhu
96/4, low acid value, use with SJ4807 for dry blend matte finish at any ratio
SJ4808-2
17-23
6000-8000
≥63
200℃/10min
Wuhu
96/4, slow reaction speed of SJ4808
SJ4810
40-48
7000-9000
≥68
200℃/10min
Wuhu
92/8, high hardness, excellent mechanical properties
SJ4811
48-55
4500-6500
≥68
200℃/10min
Wuhu
90/10, high Tg, good overall properties, suited to transfer print powder
SJ4815
48-55
3500-5500
≥66
200℃/10min
Wuhu
90/10, high Acid Value, use with SJ4816 to get low gloss, and good surface smooth, suited to transfer print powder
SJ4816
17-22
4000-7000
≥62
200℃/10min
Wuhu
96/4, low Acid Value, use with SJ4815 to get low gloss, and good surface smooth, suited to transfer print powder
SJ4817
48-55
2500-5500
≥66
200℃/10min
Wuhu
90/10, good weatherability, dry blend with SJ4818 to get low gloss; good surface smooth, suited to transfer print powder
SJ4818
17-23
4000-7000
≥61
200℃/10min
Wuhu
96/4, good weatherability, dry blend with SJ4818 to get low gloss; good surface smooth, suited to transfer print powder
SJ4855
29-35
3500-6000
≥60
200℃/10min
Wuhu
93/7, good heat and yellowing resistance, good flow, mechanical properties and exterior durability
SJ4865
30-36
4500-7500
≥66
200℃/10min
Wuhu
93/7, fast curing with excellent weatherablity and mechanical property
SJ4866
29-35
5500-7500
≥67
200℃/10min
Wuhu
93/7, high Tg and gloss, good flow and excellent exterior durability and storage stability
SJ4866DT
29-35
5500-7500
≥67
200℃/10min
*
Wuhu
93/7, tribo version of SJ4866
SJ4866-1
29-35
5500-7500
≥67
200℃/10min
Wuhu
93/7, accelerated version of SJ4866
SJ4866-2
29-35
5500-7500
≥67
200℃/10min
Wuhu
93/7, low reactivity version of SJ4866
SJ4866-3
29-35
5500-7500
≥67
200℃/10min
Wuhu
93/7, Ultra low reactivity version of SJ4866
SJ4866-3DT
29-35
5500-7500
≥67
200℃/10min
*
Wuhu
93/7, tribo version of SJ4866-3
SJ4867
29-35
5500-7500
≥67
200℃/10min
Wuhu
93/7, high Tg, low VOC, excellent flow and mechanical properties
SJ4868
30-36
4000-6000
≥67
200℃/10min
Wuhu
93/7, high Tg, excellent overall properties and weatherability
SJ4868DT
30-36
4000-6000
≥67
200℃/10min
*
Wuhu
Tribo version of SJ4868
SJ4870
70-80
2000-5000
≥65
200℃/10min
Wuhu
88/12, high Acid Value resin for dry blend matte finish, excellent weatherability and Chemical resistance
SJ2000
33-37
3500-5500
≥63
200℃/10min
Huangshan
93/7, good exterior durability and flow, applied to aluminum profiles
SJ2216
33-37
4000-6000
≥65
200℃/10min
Huangshan
93/7, good exterior durability and flow, excellent overall properties, applied to sand textured aluminum profiles
SJ9000
32-38
4500-6500
≥65
200℃/10min
Huangshan
93/7, general-purpose resin with good mechanical properties
SJ9000A
32-38
4500-6500
≥65
200℃/12-15min
Huangshan
93/7, good flow and mechanical properties, applied to physical matte coatings
SJ9000K
30-36
4500-6500
≥63
200℃/15min
Huangshan
93/7, slow cured with good flow
SJ9006
28-33
5000-7000
≥62
200℃/10min
Huangshan
94/6, good mechanical properties and flexibility, general industrial use
SJ9028
32-38
4500-6500
≥65
200℃/10min
Huangshan
93/7, cost-effective type, applied to texture powder
SJ9028-6
32-38
4500-6500
≥65
200℃/10min
Huangshan
93/7, organotin free, cost-effective type
SJ9130
28-33
4500-6500
≥62
160℃/20min
Huangshan
93/7, fast cured with good mechanical properties
